Ridgus's Shop
I am a Secondary teacher from Reading. I am an experienced Construction teacher. I also teach Design Technology and Engineering. Please have a look at my resources.
43Uploads
21k+Views
8k+Downloads
I am a Secondary teacher from Reading. I am an experienced Construction teacher. I also teach Design Technology and Engineering. Please have a look at my resources.
Vocational studies
Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.1-1.8 All Lessons
This is a bundle for EDUQAS Construction and the Built Environment Unit 1. The new specification that was introduced in 2022.
In this bundle is a teaching powerpoint and student tasks for each of the Assessment Criteria.
AC1.1 The Sector
AC1.2 The Built Environment Life Cycle
AC1.3 Type of Building and Structure
AC1.4 Technologies and Materials
AC1.5 Building Structures and Forms
AC1.6 Sustainable Construction Methods
AC1.7 Trades, Employments and Careers
AC1.8 Health and Safety
Each powerpoint is a breakdown of the AC and is lesson by lesson. Each lesson is interactive with tasks that can be printed directly from the powerpoint. Each lesson has a starter and plenary.
This will save you hours of planning.
Also included is a Unit 1 knowledge tracker.
Please check out other resources in my shop for this course.
Bundle total is £34
Sold at £25 saving you 26%
EDUQAS Construction and the Built Environment Unit 1 AC1.8
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.8 Health and Safety
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.7
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.7 Trades, Employments and Careers
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.6
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.6 Sustainable Construction Methods
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.5
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.5 Building Structures and Forms
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.4
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.4 Technologies and Materials
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.3
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.3 Types of Building and Structure
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
Bundle
EDUQAS Construction and the Built Environment Unit 1 & 3 (New Spec) Starter Kit
An excellent bundle for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incorporated. Tasks can be printed directly out from powerpoint and given to students. Each lesson has a starter and a plenary.
Currently Assessment Criteria AC 1.1 The Sector and AC 1.2 The Built Environment Life Cycle have teaching powerpoints and the final 3 Assessment Criteria will be added in the coming months.
Teacher/ Student tracker for Unit 1 that students can Red, Amber, Green their understanding. All assessment criteria covered
**Unit 3 Constructing the Built Environment **
Controlled assessment framework booklet for students that can be fully adapted to choice of Scenario and Task.
Excel tracker for controlled assessment tasks that links directly to the booklet.
My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources.
EDUQAS Construction and the Built Environment Unit 3 (New Spec) Booklet and Tracker
**Unit 3 Constructing the Built Environment **
Controlled assessment framework booklet for students that can be fully adapted to choice of Scenario and Task.
Excel tracker for controlled assessment tasks that links directly to the booklet.
My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources.
**
Please note this resource is available as part of my EDUQAS Construction and the Built Environment Starter Resource Bundle**
EDUQAS Construction and the Built Environment Unit 1 Knowledge Tracker
Unit 1 Introduction to the Built Environment:
AC 1.1 The Sector
Teacher/ Student tracker for Unit 1 that students’ can Red, Amber, Green their understanding. All assessment criteria covered in detail and links directly to each lesson in the teaching powerpoints. It is clear and easy to see and can be stuck in student books, displayed on the board, or shown to parents.
My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources.
**
Please note this resource is available as part of my EDUQAS Construction and the Built Envrionment Starter Resource Bundle**
EDUQAS Construction and the Built Environment Unit 1 AC1.2
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.2 The Built Environment Life Cycle
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.1
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.1 The Sector
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
Plumbing Project Booklet - Construction
A student booklet designed for a plumbing project that can last 15 lessons. Copper pipe plumbing a letter or number. Soldering, pipe bending etc
Each page has tasks which are linked to the teaching powerpoint and the practical lessons are also broken down inside so students understand what they need to do.
At the end of each page their is an option for the students to self access against a pre-set criteria and this is linked to a quick and easy teacher assessment.
Can be used as a small introductory project to a construction course or a different DT project for KS3 and 4
Construction Legislation Card Sort
An activity that can be used as a starter or plenary and helps students learn what Construction Health and Safety legislation stands for. Cards are set out on a grid ready to be printed and cut.
Bundle
WJEC Constructing the Built Environment Unit 1: Safety and Security in Consruction
This Bundle include a multiple lesson powerpoint and a student work booklet for WJEC Unit 1 Safety and Security in Construction. It is modelled on the specification and covers all the learning objectives and assessment criteria.
Topics Covered:
Signs (RED, BLUE, YELLOW, GREEN, ORANGE)
Risk Assessments
Sub and Super Structure
Fire extinguishers
Permits to Work
Hazard/ Risk/ Control Measure
Security of Construction Site
Health and Safety Legislation
Responsibility of Employer and Employee
It can also be used with other Construction course to as it would provide students with a very solid understanding of Health and Safety in the construction industry.
WJEC Safety & Security in Construction UNIT 1 Student Work Booklet
A student work booklet for the WJEC Constructing the Built Environment Unit 1: Safety and Security in Construction.
Lots of different worksheets with content taking directly from the Specification and following each of the learning objective and assessment criteria in order.
The booklet is full of different types of tasks and activities with lots of visual stimuli. Plenty of opportunity for student self assessment and teach assessment. This booklet will help students learn the key topics for the exam but also use it as revision later on and teacher can track knowledge. This is a resource very suitable for lower ability students.
Topics Covered:
Signs (RED, BLUE, YELLOW, GREEN, ORANGE)
Risk Assessments
Sub and Super Structure
Fire extinguishers
Permits to Work
Hazard/ Risk/ Control Measure
Security of Construction Site
Health and Safety Legislation
Responsibility of Employer and Employee
This resource can also be purchased as part of a bundle with the Unit 1 Safety and Security powerpoint found in my shop!
Bundle
Structures (Construction and Engineering)
A bundle of resources of lessons and activities that link together to form a whole unit of work on Structures.
Areas such as, forces, triangulation, bridges, nature, domes, mega structures are covered.
Includes a powerpoint spaghetti project that can students apply their knowledge to make a strong structure.
Visual student friendly powerpoints with printable resources and tasks for students that can be taught to as a fun project in Construction, Design Technology or Engineering.
What Am I riddles for Structures (Construction/ Engineering)
A good stater activity which uses riddles to help students learn key words related to structures and buildings. Answers provided.
This activity is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop or used on its own.
Structures Keyword Bingo
A good starter/ group activity with key structure related words and questions provided.
You can rig it so a certain group wins or make up different questions.
Students could make up questions as a flipped learning activity
I have made several different grids that can be printed and laminated so used multiple times and a set of example questions.
This activity is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop but also used on its own
Spaghetti Structure Project (Construction/ Engineering)
Lesson Powerpoint and activities for a fun spaghetti project which directs students to build a structure which is tall or can hold the weight of bricks. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. A fun way for students to show they understand how to make a structure strong and resist force.
This resource includes:
Leveled WALT and WILF (Learning Objectives)
Starter, main and student help sheets and evaluation (printable worksheets within powerpoint)
Lots of visual stimuli
This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)